X2 WIRELESS

X2 Digital Wireless Rack Mount Unit

X2 Digital Wireless Rack Mount Unit

X2 Digital Wireless Rack Mount Unit

 

X2 Digital Wireless Rack Mount Unit

Overall System Specifications

 

Transmission Format:

X2 proprietary digital audio transmission

Frequency Response:

10 Hz - 20 kHz

Audio Dynamic Range:

Greater than 118 dB

Distortion:

0.03% THD

RF Carrier Frequency:   

902 MHz to 928 MHz, FSK, dual frequency transmission

Number of Selectable Frequencies:   

Five

RF Output Power:   

15mw

Audio Output Level:   

Unity gain with transmitter input

Polarity:

Positive voltage at input yeilds positive voltage at output

Transmission Range:   

300 feet line-of-sight (may vary due to local conditions)

FCC Approval:   

Part 15 approved, no user-license required

Operating Temperature Range:

–20° to +85° C (-4° to +185° F)

 

 

 

 

XDT4 Transmitter Specifications   

 

A/D Conversion:   

24-bit Delta Sigma, 128 times over sampling

Input Impedance:   

1.2 M-ohm

Connectors:   

1/8" Unbalanced locking connector

Controls:

Power On/Off, Channel Select

Five Segment LED Display:   

Power On, Channel, Battery Life, Audio Level Meter

Dimensions:   

4 H x 2.4 W x .66 D in.

Battery Life:   

9V alkaline, switching power supply, two modes:
Q-DiversityPLUS™ mode: ~5.5 hrs in (dual frequency)
Q-Diversity™ mode: ~6.5 hrs in standard (single frequency)

Weight:

.25 lbs. (with 9v battery installed)

Housing:

Polycarbonate, impact tested to 300 lbs.

 

 

XDR4 Receiver Specifications   

D/A Conversion:   

24-bit Delta Sigma, 128 times over sampling

Output:   

2.12V RMS (Unbalanced: 1.8K Ohm)

Connectors:   

1/4" Unbalanced TRS output 1.8K-ohm impedance, tip= instrument voicing, ring= full bandwidth, sleeve= ground, XLR Balanced 600 ohm

LED Display:   

Power On, RF, Channel, Diversity, Battery Life, Audio Level Meter

Controls:   

Power On/Off, Channel/Mode Select

Dimensions:   

1.75 H x 16.2 W x 7.5 D in.

Power Requirements:   

9V DC 500mA via included AC/DC adapter

Weight:

2.5 lbs (with rack hardware and antenna installed)

Housing:

Polycarbonate, impact tested to 300 lbs.

Retail Price $899 Sale Price $499


X2 Digital Wireless System

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


X2 Digital Wireless System

quick features:
. 24-bit linear AD/DA converters capture your exact performance . No compander ICs that inevitably squash your sound . Frequency-ClearT 900 MHz UHF transmission means no DTV or licensing concerns . Compact "stomp-box" receiver fits in your guitar case . Receiver operates on a 9V battery or optional AC adapter means no 220V concerns . Designed, engineered and manufactured in the USA


XD Series Digital UHF Wireless - Simply the Best

The XD Series Digital UHF Wireless System is the wireless solution you've been waiting for. Designed specifically for instrument applications, this 24-bit digital system delivers your tone and performance with the sound and feel of a direct wire connection - all at a price that won't break the bank.


X2's proprietary digital technology provides superior fidelity while the "stomp-box" style receiver's internal micro-processor selects the data stream from among the internally mounted Q-diversityT antennas to eliminate dropouts, interference including DTV, compander ICs and the associated 'pumping' and 'breathing' that squashes your tone, and other problems associated with analog wireless technology.

All of this sound and performance is provided to you with an incredible feature set including: 24-bit digital converters yielding 117 dB dynamic range to capture your most expressive performances, five user-selectable operating frequencies, auto DigiScanT to confidently select an open channel, frequency response all the way down to 10 Hz for truly thundering lows, stereo 1/4" output for instrument and full-bandwidth or 'tuner out'
applications, and a five segment LED display (battery status, link status, audio level and channel).

Operating the system is unlike any wireless you've tried before. Simply connect the transmitter to the source via the 1/8" threaded-collar locking connector and the "stomp-box" style receiver to your amplifier, mixer or pedal-board. Then power up making sure the transmitter and receiver are set to the same channel. That's it. You're ready to go! No knobs to adjust and no antennas to loose or break mean you're up and running in approximately the same time it takes to connect a cable.

With the XD Series Digital UHF Wireless System from X2, you'll have the freedom and sound to deliver your most expressive performance every time without breaking the bank.

Retail $499 Sale Price $349

  Back to the top of page


 

     
Web Development by Infographic, Inc. © 1996- 2003 Basscentral All rights reserved. Problems with this site? Contact the webmaster.    [an error occurred while processing this directive]