What's small, lightweight, expensive, and for Bass? You got it, EA! According
to Bass Central co-owner, Beaver Felton, "I've seen and heard these cabs evolve over the last 3 years and have got to admit that the amount of volume and lows these mini brutes put out is shocking. At the last NAMM Show, I had one of the crew play an MTD 535 through a couple of VL-108 cabs (1x8", mid, tweeter, 27 lbs.) while I listened for low end projection from about 20 feet away. Indeed, they produced crisp highs as well as tight bottom". Jim
Lucas, a "close house associate" of Bass Central and one of Orlando's
most employed bassists, now uses a VL-208 for his 6-string bass on a wide
variety gigs.
New In March 2009 For Euphonic Audio :
Coming in March, NEW I AMPS with more power! See below for some information and street prices.
Coming this year is an
all new, 56 pound NL-410. The NL-410 is lighter, smaller, more portable and most
importantly, more affordable than the NM-410 it replaces. The American made NL-410
will easily compete in both sound and price with the “boutique” manufacturers who have
moved their manufacturing to Asia. We'll post pictures as soon as they arrive! Street Price $1295


|
The Pro – Replacing the “Classic” iAmp 800 and iAMP 500 is the iAMP Pro. Sharing the
same footprint, preamp, award winning Tone Shaping and layout as the iAMP 500, the
iAmp Pro, with its high end studio inspired brushed aluminum faceplate and spun
aluminum knobs, boasts an amazing 1,200 watts of power at only 9 pounds.
Price $1195 |
|


|
The Doubler – Especially designed with the upright player and doubler in mind. The
Doubler has the same 550 watt power supply and power amp and all the innovative
features of the Micro with the addition of an XLR input, Phantom Power, variable notch
filter (Q: 18Hz), high pass filter, and variable phase adjustment
Price $750 |
|


|
The Micro – identical in size to the original Micro 300, the new “Micro” boasts a brand
new power supply and power amp with 550 watts of pure, clean power and a new, high
end studio inspired brushed aluminum faceplate and spun aluminum knobs.
Price $675 |
|
 |
Ultimate performance and portability.
At only 8.5 lbs, the iAMP 200 is high performance, fully featured, small footprint, rackmountable amp head that provide the ultimate when it comes to performance, portability and price.
The iAMP 200, built on the same, Class D, technology as the flagship, iAMP800, features front panel gold plated input and output jacks, DI output, dual line voltage switch for both the US and Europe, CD input and, of course, the unique EA tone shaping section. Additionally the iAMP 200 features a rear-mounted Link In/Link Out connectors, which provides a signal to drive matching Wizzy Powered Cabinets.

Applications: |
Acoustic instruments, bass and keyboards. |
Inputs: |
¼” Active and Passive jacks with gain LED level indicators, Mini Stereo In with volume (CD, tape) |
Controls: |
Input Volume, EQ In/Out, Master Volume, DI Level, Speaker On/Off, DI Output On/Off |
EQ: |
Lo, Lo-Mid, Hi-Mid, and Hi: all with boost/cut and variable frequency controls (Lo-Mid and Hi-Mid have Half/Full Octave Q switch) |
EQ Presets: |
Deep, Contour 1, Contour 2, and Bright |
Effects Loop: |
Series and Parallel Post EQ with independent level controls |
Outputs: |
Two Speakon speaker, 1/4" Stereo Headphone, 1/4" Tuner/Line Out, XLR balanced DI, Link Out |
Frequency Response: |
20Hz to 20kHz ± 3dB |
Line Voltage: |
Selector switch located on rear panel |
Power Output: |
200 watts @ 4 Ohms, 300 watts peak |
Size: |
3.5"H x 14"W x 9"D
(rackmountable with optional rack ears) |
Weight: |
8.5 lbs. (3.9 kg) |
Other Features: |
Onboard Limiter |
|
Retail $795 / Sale $599 |
|
 |
Introducing the iAMP 300 Micro
The US made, EA iAMP Micro 300 is a revolutionary, about 3 pound, 300 watt, dual channel, Class D, musical instrument amplifier. The EA iAMP Micro 300 sets the standard for sound, size, and power. The Micro 300 combines a new, innovative switching power supply and an elegant and pristine preamp with EA’s critically acclaimed digital power amp to create possibly the lightest, most powerful musical instrument amplifier on the market today!
Inside the iAMP Micro 300 is a revolutionary, cutting edge power supply. The 4” by 4” Switching Power Supply features true Power Factor Correction from 100-240 volts and from 50-60 Hz. Whether your traveling the world, using a 25 foot extension cord or playing some funky dive with questionable power, the Micro 300 will always deliver a cool 300 watts (@ 4ohms).
The power amp of the Micro 300 is based on the critically acclaimed, Class D power amp section of the iAMP 200. This 3” by 4” power amp’s highly efficient design means no need for a cooling fan or external heat sinks.
Finally, the control circuit of the Micro 300 was designed to be scalable. EA envisions the possibilities of Micro series amps of up to 1,500 watts.
All this and more in a package weighing around 3 pounds and the size of a 1/2 sheet of paper!

Inputs: |
Two channels with Intelligent Input Switching with optional footswitch |
Controls: |
Channel switch, Input gain, 3-Band EQ, Master Volume, Mute switch, Effects loop blend |
EQ: |
Low, Mid, and High for each channel |
Effects Loop: |
Parallel effects loop with blend control |
Outputs: |
Speakon speaker, tuner, effects send, 1/4" stereo balanced DI out |
Frequency Response: |
20Hz to 20kHz ± 3dB |
Power Output: |
300 watts @ 4 ohms |
Size: |
2.1"H x 8.5"W x 5.4"D |
Weight: |
2.3 lb |
MSRP: |
$795.00 |
|
Retail $795 / Sale $599 |
|
 |
Thirteen pounds of performance and versatility.
The iAMP 500 is the most versatile member of the iAMP family. Its’ combination of pure power and portability are second to none. The iAMP 500 built on the same technology as the flagship, iAMP800, is a high performance, fully featured, small footprint rackmountable amp.
The iAMP 500 features front panel gold plated input and output jacks, DI output, dual line voltage switch for both the US and Europe, CD input and, of course, the unique EA tone shaping section. With 500 watts of pure, clean power and weighing in at a mere 13 lbs., the iAMP500 provides the ultimate when it comes to performance, portability and price.

Applications: |
Acoustic instruments, bass and keyboards. |
Inputs: |
¼” Active and Passive jacks with gain LED level indicators, Mini Stereo In with volume (CD, tape) |
Controls: |
Input Volume, EQ In/Out, Master Volume, DI Level, Speaker On/Off, DI Output On/Off |
EQ: |
Lo, Lo-Mid, Hi-Mid, and Hi: all with boost/cut and variable frequency controls (Lo-Mid and Hi-Mid have Half/Full Octave Q switch) |
EQ Presets: |
Deep, Contour 1, Contour 2, and Bright |
Effects Loop: |
Series and Parallel Post EQ with independent level controls |
Outputs: |
Two Speakon speaker, 1/4" Stereo Headphone, 1/4" Tuner/Line Out, XLR balanced DI |
Frequency Response: |
20Hz to 20kHz ± 3dB |
Line Voltage: |
Selector switch located on rear panel |
Power Output: |
350 watts @ 8 ohms, 500watts @ 4 Ohms & 2 Ohms. 800watts peak |
Size: |
3.5"H x 14"W x 9"D
(rackmountable with optional rack ears) |
Weight: |
13 lbs. (5.9 kg) |
Other Features: |
Onboard Limiter |
|
Retail $1195 / Sale $899 |
|
 |
The flagship of the EA line is the iAMP800. The Class D, digital, iAMP800 delivers an astounding 800 watts of pure, clean power. At a kilowatt, at 2 ohms, and a peak power rating of 2500 watts there is enough power to handle any gig, anywhere!
The iAMP features an isolated, fully shielded transformer, gold plated input and output jacks (except for the Speakon), both series and parallel effects loops, DI output, dual line voltage switch for both the US and Europe, onboard limiter, CD input and, of course, the unique EA tone shaping section. The result is a high performance, fully featured, small footprint rackmountable amp head that at under 20 pounds is comfortable powering speakers in a concert level environment. With an amazing efficiency rating of 85% the iAMP needs no cooling fan. Power when you demand it and silence when you don’t.

Applications: |
Acoustic instruments, bass and keyboards. |
Inputs: |
¼” Active and Passive jacks with gain LED level indicators, Mini Stereo In with volume (CD, tape) |
Controls: |
Input Volume, EQ In/Out, Master Volume, DI Level, Speaker On/Off, DI Output On/Off |
EQ: |
Lo, Lo-Mid, Hi-Mid, and Hi: all with boost/cut and variable frequency controls (Lo-Mid and Hi-Mid have Half/Full Octave Q switch) |
EQ Presets: |
Deep, Contour 1, Contour 2, and Bright |
Effects Loop: |
Series and Parallel Post EQ with independent level controls |
Outputs: |
Two Speakon speaker, 1/4" Stereo Headphone, 1/4" Tuner/Line Out, XLR balanced DI |
Frequency Response: |
20Hz to 20kHz ± 3dB |
Line Voltage: |
Selector switch located on rear panel |
Power Output: |
500 watts @ 8 ohms, 800 watts @ 4 Ohms, 1000 @ 2 Ohms. 2500 watts peak |
Size: |
3.5"H x 15.75"W x 10"D
(rackmountable with included rack ears) |
Weight: |
19 lbs. (8.6 kg) |
Other Features: |
Onboard Limiter |
|
Retail $1495 / Sale $1119
|
|
|
 |
At EA we always listen to our customers. So when a customer suggested we put an iAMP 500 head into the Wizzy Combo, we listened. The Wizzy 500 Combo features a 500 watt, Class D power amp and EA’s innovative, musical tone shaping section with the innovative Wizzy cabinet. The 12” driver with an integrated Whizzer cone is mounted in EA’s Transmission Line cabinet. The digital amplifier circuitry effortlessly produces 500 watts of Class D power without the noise or inconvenience of a cooling fan. The Wizzy’s 12” loudspeaker is actually a dual-cone device, designed to have a full bandwidth response that accurately produces every nuance of the player’s sound. The 12” driver and Whizzer cone simultaneously produce both low and high frequency signals from a single voice coil.*
*The design of the loudspeaker and transmission line provide a smoother and more extended low frequency output while faithfully reproducing the brilliance of the digital power amp. The result is a cabinet that has the old school vibe of the classic bass cabinets of the 60’s with the high end accuracy and power needed for today’s live performances and recording studios.

Applications: |
Acoustic instruments, bass and keyboards. |
Inputs: |
¼” Active and Passive jacks with gain LED level indicators, Mini Stereo In with volume (CD, tape) |
Configuration: |
1 x 12" |
Woofer: |
Proprietary 12" full-range driver with Whizzer cone |
Controls: |
Input Volume, EQ In/Out, Master Volume, DI Level, Speaker On/Off, DI Output On/Off |
EQ: |
Lo, Lo-Mid, Hi-Mid, and Hi: all with boost/cut and variable frequency controls (Lo-Mid and Hi-Mid have Half/Full Octave Q switch) |
EQ Presets: |
Deep, Contour 1, Contour 2, and Bright |
Effects Loop: |
Series Post EQ with independent level control |
Outputs: |
Two Speakon speaker, 1/4" Stereo Headphone, 1/4" Tuner/Line Out, XLR balanced DI |
Frequency Response: |
45Hz to 12kHz |
Line Voltage: |
Selector switch on back panel |
Sensitivity: |
103dB @ 1m |
Sound Pressure: |
126dB @ 1m |
Power Output: |
500 watts RMS into 12" Wizzy speaker |
Size: |
20.75"H x 17"W x 12.5"D |
Weight: |
44 lbs. (20 kg) |
Handle: |
One integrated custom cup handle on each side |
|
Retail $1845 / Sale $1379 |
|
 |
Could this be the ultimate small combo?
We think so. We matched our flagship iAMP800 with the CxL-112L cabinet to bring you a package that is both potent and portable. Combining cutting edge technology, unsurpassed design and uncompromising quality, the iAMP800 combo could easily be the finest combo amp on the market.
The iAMP800 Combo is a full range amplifier/speaker system that provides plenty of punch with monitor-like accuracy. It was designed for use with all instruments—not just bass, so it sounds equally superb with acoustic guitar or keyboards. The iAMP800 combo has all the features of the iAMP800 and the CxL-112L as well as built in wheels and a handle which is both extendable and removable. Whatever instrument you play, it will deliver incredible output from a compact package that you can cart with one hand.

Applications: |
Acoustic instruments, bass and keyboards. |
Inputs: |
¼” Active and Passive jacks with gain LED level indicators, Mini Stereo In with volume (CD, tape) |
Configuration: |
Coaxial 1 x 12" |
Woofer: |
Custom Kevlar 12" |
Tweeter: |
1" High Efficiency Phenolic Compression Driver |
Tweeter Level Control: |
Located on rear connection panel |
Controls: |
Input Volume, EQ In/Out, Master Volume, DI Level, Speaker On/Off, DI Output On/Off |
EQ: |
Lo, Lo-Mid, Hi-Mid, and Hi: all with boost/cut and variable frequency controls (Lo-Mid and Hi-Mid have Half/Full Octave Q switch) |
EQ Presets: |
Deep, Contour 1, Contour 2, and Bright |
Effects Loop: |
Series and Parallel Post EQ with independent level controls |
Outputs: |
Two Speakon speaker, 1/4" Stereo Headphone, 1/4" Tuner/Line Out, XLR balanced DI |
Frequency Response: |
38Hz to 14kHz |
Sensitivity: |
103dB @ 1m |
Power Output: |
500 watts @ 8 ohms, 800 watts @ 4 Ohms, 1000 @ 2 Ohms. 2500 watts peak |
Size: |
20.75"H x 17"W x 15"D
(rackmountable with included rack ears) |
Weight: |
58 lbs. (26.3 kg) |
Retail $2445 / Sale $1795 |
|
 |
“Flip-top” sound for the new millennium
The Wizzy 112 is part of the innovation of EA's Wizzy series of combos and cabinets. The Wizzy's 12" loudspeaker is actually a dual cone device. The 12" driver and Whizzer cone simultaneously produce both low and high frequency signals from a single voice coil. The design of the loudspeaker and transmission line provide a smoother and more extended low frequency output while faithfully reproducing the brilliance of our digital power amps. The Wizzy has a big, warm, round sound that brings back those classic bass tones in a compact enclosure.
Now with the lightweight and durable Nub-Tex finish, padded handles, & protective corners!

Configuration: |
1 x 12" |
Woofer: |
Proprietary EA 12" full-range driver with Whizzer cone |
Frequency Response: |
45Hz to 12kHz |
Sensitivity: |
103dB @ 1m |
Sound Pressure Level: |
126dB @ 1m |
Power Handling: |
200 watts |
Impedance: |
4 ohm |
Connection: |
Two Speakon combo connectors (1/4" & Speakon) |
Size: |
17"H x 17"W x 12.5"D |
Weight: |
29 lbs |
Handle: |
One integrated custom cup handle on each side |
Retail $645 / Sale $540 |
|
 |
The ultimate one box does all!
The new CXL-112L features our custom Kevlar 12" driver with coaxial tweeter. The performance of this speaker is astounding, as it offers an extremely accurate and flat audio response. That means you hear exactly what you put into it. There are no colored artifacts - just pure, studio-monitor clarity. This box will produce thundering low end, down to low B with ease, as well as a sweet high end. You get a package that's small, easy to move, and will reproduce all instruments, basses, acoustic guitars, and keyboards alike. All with audiophile sound.

Configuration: |
Coaxial 1 x 12" |
Woofer: |
Custom Kevlar 12" |
Tweeter: |
1" High Effciency Phenolic Compression Driver |
Tweeter Level Control: |
located on rear connection panel |
Frequency Response: |
38Hz to 14kHz |
Sensitivity: |
103dB @ 1m |
Sound Pressure Level: |
128dB @ 1m |
Power Handling: |
350 watts (continuous unclipped power) |
Impedance: |
8 ohm |
Connection: |
Two Speakon Jacks |
Size: |
19"H x 17"W x 15"D |
Weight: |
44 lbs (20 kg) |
Handle: |
One integrated custom cup handle on each side |
Retail $895 / Sale $669 |
|
 |
The new NL-210 features 2 of our custom Kevlar 10" Neodymium drivers with a compression tweeter. The performance of this speaker is uncanny, as it offers an extremely accurate and flat audio response. That means you hear exactly what you put into it. There is no coloration - just pure, studio-monitor clarity. This box will produce thundering low end, down to low B with ease as well as a sweet high end.
The use of imported poplar plywood and neodymium magnets reduces the weight of the NL-210 from 82 pounds (CXL210) to 44 pounds. You get a package that's small, easy to move, and will reproduce all instruments, basses, acoustic guitars, and keyboards alike. All with audiophile sound.
More Volume, Massive Tone, Less Weight!

Configuration: |
2 x 10" |
Woofer: |
2 Custom Neodymium Kevlar 10" |
Tweeter: |
1" Phenolic Compression Driver |
Tweeter Level Control: |
located on rear connection panel |
Frequency Response: |
45Hz to 14kHz |
Sensitivity: |
100dB @ 1m |
Sound Pressure Level: |
127dB @ 1m |
Power Handling: |
500 watts |
Impedance: |
8 ohm |
Connection: |
Two Speakon Jacks |
Size: |
22.5"H x 17"W x 15"D |
Weight: |
44 lbs |
Handle: |
One integrated custom cup handle on each side |
Retail $1195 / Sale $975 |
|
 |
(Soon to be NL-410, see top of page for specs, Price $1295)
Ultimate performance and portability.
The EA NM-410 represents the state of the art in speaker cabinet design. The design goal of the NM-410 was to create a high power 4x10 cabinet that was loud, light weight, and provided a truly focused sound throughout the listening environment. More drivers mean more volume. More drivers also mean more interference between those drivers. This compromise, between volume and focus was, until now, a reality of playing 4x10 cabinets. The NM-410 changes all of that.
The NM-410’s side vented, “M” shaped Transmission Line, proprietary Neodymium drivers, and innovative design have created a cabinet that is both extremely loud and presents a totally focused sound at any point in the listening environment. The imported Poplar plywood and Neodymium speakers keep this, the ultimate 4x10, at a reasonable 76 pounds. With all of the cutting edge design, technology and features such as its built in wheels, the NM-410 is truly the envy of the class.
More Volume, Massive Tone, Less Weight!

Configuration: |
4 x 10" |
Woofer: |
4 Custom Neodymium Kevlar 10" |
Tweeter: |
1" Titanium Compression Driver |
Tweeter Level Control: |
located on rear connection panel |
Frequency Response: |
45Hz to 14kHz |
Sensitivity: |
103dB @ 1m |
Sound Pressure Level: |
133dB @ 1m |
Power Handling: |
1000 watts |
Impedance: |
8 ohm |
Connection: |
Two Speakon |
Size: |
25"W x 22"H x 18"D |
Weight: |
76 lbs (34.5 kg) |
Handle: |
One removable handle & integrated casters |
Retail $1795 / Sale $1345 |
|
|